Table of contents

Summary

This document describes Complex Landed Costing process.

For simple landed costing see Simple Landed Costing

To see which purchase orders require action see Purchase Reports Dashboard

General Overview of Landed Costing

Landed costing adds costs incurred in getting the stock into store to the price paid for the stock and updates the average cost in the system

A simple view of what is going on

For the Accountants - here are the journals created.

Supplier freight is always allocated to the stock cost. Supplier freight is not known until the supplier invoice is entered and includes freight. The average cost is updated by averaging the freight based on line item value. The average cost update is limited to the value that would have resulted if all the stock is still in the system - if there is less stock remaining than was received then not all the freight will be allocated and some will remain in the "Carriage In" control account

If you do not want the freight allocated or you want to allocate it using a different method then enter it as a separate invoice.

Landed Cost for Drop Ship Purchase Orders

A drop ship purchase order is going direct to the customer and never passes through your warehouse. However it is important to know the cost to you of the goods.

To create a drop ship purchase order - create a sales order and right click on any order lines that will be drop shipped. Then on the created purchase order create a landed cost estimate.

Landed Cost Estimate form, Results tab:
1. If linked PO is a drop ship PO generated from a sales order:
  1. Show sales order code as a link to open the sales order.
  2. If sales order customer uses foreign currency:
    1. Show the currency code and the exchange rate from the SO.
    2. Add 2 columns showing 'Landed cost (ea)' and 'Total landed cost' converted to the SO customer's currency using the SO FX rate.
On a sales order line with SupplierShip YES, if the generated PO has a Landed Cost Estimate then add a context menu option to open the Landed Cost.
1. If the landed cost has charges then 'Calculate and show apportions' and switch to the Results tab.

The landed cost for a drop ship purchase order can be updated from estimate to actuals but is never "Used" by the system to update average cost.

There are two stages in Complex Landed Costs

Estimated stage = costs are estimated. The PO can be receipted and average cost of the stock will use the estimated costs
Actual stage = actual costs are compared with the costs used in the estimate stage and the average costs are then adjusted to suit.

to use Landed costing configurations are required

"Landed Cost Clearing Account" and Landed Cost Expense Account" in GL Control Accounts " see GLControlAccountsforLandedCosting
"ChargeType"s in Lookups

The typical scenario is as follows:

A number of products are to be imported from an overseas country from a number of suppliers
1. Therefore there are multiple purchase orders each with multiple lines on them
Costs are then incurred
1. A shipping company is engaged - and will cost money
2. Transport is arranged in the foreign country, travelling to your country and then within your country to your dock
3. Export and import fees and duty may apply
The product is then shipped
The product arrives in your store and is placed into stock
Some of this product may be used or sold
The final charges are presented to you by your suppliers (and not by item or PO)

Because of the timing of the final charges being presented we need to:

Use estimated values in order to receipt the stock to store and arrive at an approximate cost
Update the cost once the actuals have been received

Set the Purchase Order to use Landed Costing

Create a Landed Cost Estimate - one for each PO

Select purchase order that will require landed cost adjustment
Provide a name

Entering the Charges

Expected charges may be entered as estimates and later (even after stock receipt) linked to the actuals and stock value recalculated if required.

FX amounts can be used - they are converted to the base currency for the calculation

Enter Type of charge
1. Charges are setup at Administration > configuration > Lookups > "ChargeType"
enter Method of apportioning the charge
1. By weight will look at the weight of each item and allocate by weight and is useful for shipping or air freight that is charged by weight
2. By Dollar value uses the dollar value on the purchase order
3. By volume uses the article volume
4. Manual enables you to manually allocate the charges across all related lines
Description - add a note to so you can remember what this charge was intended to cover

View the Estimated charges by Purchase Order Line

Action Button: Calculate and show Apportions

Review calculations

Manual values need to be entered in the grid - the remainder will show until you have allocated all the expected cost

Each line will show the purchase order value, the landed costs being added and the final cost ea. This will then be used to update the average cost

New Average cost = (current average cost * current stock qty + qty from the PO * final cost ea) / (current stock qty + PO stock Qty)

Set the Estimate Ready to Use

When you have completed the estimate then Action Button: Set Estimate Ready to use

Receiving Stock - no changes to standard process

Stock can only be received if the Landed Cost Estimate has been set to "Ready to Use"

Receive stock as normal

The system will use the calculated average cost for stock value journals - see Purchase Order from PO to Goods Receipt
The Journals created are at the bottom of this page

Landed Cost Estimate recalculates based on actual counts before stock journals created

When the stock is counted the landed cost allocation is updated and recalculated before the Stock Journals are created

If less stock than was expected is counted during receipt - then the average cost of all items will increase
If more stock than than was expected is counted during receipt - then the average cost of all items will decrease

Note: The $ of the stock placed into Assets will be greater than the amount to be paid to the stock supplier. The balance is placed into a clearing account (see GL Control Accounts ) until later cleared out when the actual payments/ invoices are linked to the landed cost calculation

Once product is receipted the estimated calculations have been used and cannot be changed.

Later updating the estimate to Actuals

Once actual costs for shipping, customs, inspections etc have arrived it is time to enter the actuals.

If you do not update the estimate with actuals you will have a balance in the GL Control Account "Landed Cost Clearing Account"

From the Purchase Order from PO to Goods Receipt - open the estimate

Select an invoice to link to and select the line/s on the invoice to use - allocate the amounts to use

The Invoices listed are all invoices that are listed in GL Accounts with "Landed Cost" special type set

Add additional cost lines if required

Action Button: Calculate Actual Average costs

Review calculations and adjust manual allocations in the grid. Status "Calculate and Show Apportions"

Finalised Landed Costs

Where changes are to be made to the Average Cost for the Stock Articles

The average cost of the article will be adjusted to the new average cost
- The new average cost will be applied to the current stock = ((new av cost - current av cost) * Quantity on the PO line ) / total Qty in stock now
- The new average cost will be set regardless of the amount of stock in the system
Journals will be written including clearing out any balance in the clearing account
The status will then move to Actual used

If the stock level at the time of applying the actuals is below the quantity of stock on the PO line

The stock Average cost will be set to the Average cost for the PO Line Actuals
The remainder will be journaled to the GL Control Accounts Account "Landed Cost Expense" account
1. This is to avoid stock average costs being artificially inflated due to insufficient stock at time of entering actuals - see example below

To illustrate

A product was out of stock
Say 100 units of a product was purchased for $100 with $100 total landed costs
1. The Estimated Landed Cost is $2.00 ea
2. When the PO is received - the average cost is set to $2
3. Stock value has increased by $200 = 100 items x $2
Then 50 are sold and shipped to customers - leaving 50 in stock
When the Actuals are linked to Invoices it is found that Landed costs were $150 in total ($1.50 each)
1. The Actual Landed Cost is $2.50 ea
2. Stock value increase should have been $250
When the Landed Cost is finalised - the average cost is set to $2.50 (an increase of $0.50)
1. Stock value increases by $25 = $0.50 x 50 items
2. $25 is not allocated to stock value (if it was then the average cost would have to be increased to $3.00 each item)
  1. $25 is allocated to the "Landed Cost Expense Account"

Landed costing diagram of the flow.

Accounting Journals

Journals for receipt of Stock item with locked estimate	Debit	Credit	Estimate of $20 costs
Stock on Hand - assets	120		Increase in stock value
Trade Creditors Liabilities		100	Amount paid to stock supplier
Landed cost clearing account - liabilities		20	Total allocated other costs for these items based on the estimate
Totals	120	120

Stock Supplier Invoice	Dr	Cr	Payment to supplier for stock
Trade Creditors - Liabilities		100
Goods Received not Invoiced	100
Total	100	100

CR Invoice Journal for a cost paid (customs) = must be linked to landed cost clearing account	Dr	Cr	Payment of $25 costs
Trade Creditors - Liabilities		25
Landed cost clearing account	25
Totals	25	25

Once a journal line is linked to a landed cost account



Adjustment journal required once actuals are associated	Dr	Cr	Adjustment of stock from $20 estimate to $25 Actual
Landed Cost Expenses To Stock - Expense Account		25	Expense account tracking landed costs in separate account
Landed cost clearing account - liabilities	20		Clear the clearing account of the estimate value
Stock on Hand - Assets - Credit	5		Update the stock on hand with the increase (Decrease) in value required
Totals	25	25	Result = Stock increases $5 (now $25 more than paid to stock supplier) and Landed Cost Clearing account = 0 Landed cost expense account = Actual = $25

Adjustment Journal if Actuals are used prior to stock receipt	Dr	Cr	When $25 actuals are known prior to receipt of stock
Stock on Hand - assets	125		Increase in stock value
Trade Creditors Liabilities		100	Amount to be paid to stock supplier
Landed cost expenses to stock - expense account		25	Expense account tracking landed costs in separate account
Totals	125	125	Result = Stock increases $25 more than paid to stock supplier Landed cost expense account = Actual = $25

GL Control Accounts for Landed Costing

Control accounts in GL Control Accounts

Landed Cost clearing account
1. Filled with values when stock is receipted using estimated costs
2. Cleared once known costs are allocated
Landed Cost Expense account
1. Tracks all costs that have been added to stock as part of an actual landed cost update

Example Charge Types Configuration

Setup in Lookups screen

GL Account configuration to show invoices in landed cost Actuals list